Rail transfer cart is used more frequently in life because of its high-cost performance and safety, avoiding the possibility of accidents caused by the use of steel cables, so what should we pay attention to during the use of rail transfer cart?
1. The battery can be removed, the maintenance of the battery is convenient when charging just unplugging the electric car can make a variety of repair charger to the battery pulse repair effective input to the battery, and not by the electric transfer cart controller to repair the pulse absorption.
2. If in the process of overhaul: dismantling difficult phenomenon, the body of the car in many places appear local deformation, tray plane damage, lifting and unloading too difficult, below the fixed bolt removal space is narrow, too much, part of the card phenomenon is more serious.
3. vehicle use, pay attention to the material shall not pile too high, material stacking firm, not loose, not load operation, equipment staff should focus on operating the vehicle, pay attention to the direction of travel in front of the situation, and observe the operation of other equipment around, to ensure that the operation does not collide with other equipment, operation, equipment operators shall not do things that are not related to work. electric transfer carts are a connection hook in front of and behind the cart so that they can pull other transfer carts or be pulled when necessary.
4. The track is laid in order to lay the insulation layer to avoid the leakage of the track sliding contact line, and the temporary surface of the insulation layer is covered with a layer of asphalt as a buffer layer, and then the track is installed. When installing the track, attention should be paid to the use of spot welding technology to strengthen the connection point of the track on the one hand and to extend the service life of the track on the other hand.
5. The reinforcement of the members should be accurate, the reinforcement surface should be flat and smooth, and the ratio of sulphur cement mortar should meet the requirements.
6. In the construction of the track foundation, attention should be paid to the accuracy of the vertical position of the holes of the pre-buried parts, and keep the holes clean and free of impurities.
