The low voltage electric rail transfer cart series produced by Henan Perfect Handling Equipment Co., Ltd. are very popular among users in handling equipment.
Product name: low voltage electric rail transfer cart
Product introduction: The low voltage electric rail transfer cart which takes power from the track, the two-phase AC power of 36V voltage is connected to two tracks respectively, there is no restriction of cable line, it can take power from the track at any time, it has high requirements on track laying, it needs insulation treatment, it is suitable for medium and long-distance transportation, the frequency of use is not restricted, but it can’t be used for the occasions of flammable, explosive, water, dust and iron chips.
Product Characteristics.
Advantages.
1. The series of flat carriages has safety and mobility flexibility.
2. Operation distance is not limited.
3. Speed can be adjusted.
4. Low noise.
5. Environmentally friendly.
6. Labor and cost-saving.
7. Easy to operate.
8. Easy to maintain.
9. suitable for the high frequency of use.
Disadvantages.
1. Operating distance of more than 70 meters, the number of transformers needs to be increased to compensate for the track voltage drop.
2. Higher requirements for track laying, the track needs to be insulated.
3. Suitable for the load capacity is not large.
Product Maintenance.
The flat car needs regular maintenance, add lubricating oil, check the electrical appliances, button sensitivity, etc., regularly check the insulation of the wheels and the wear of the carbon brushes. Regularly check whether the internal parts of the motor are deformed, the condition of the commutator surface and the wear of the brushes, and then resume work only after timely maintenance. Every six months (the inspection period is shortened if the electric vehicle is operated frequently and complicated), check at least once according to the following methods.
a: Clear the motor dirt, dust and carbon to ensure the normal operation of the motor.
b: Clean or replace the bearing, and fill the raceway with 3# lithium grease after cleaning.
c: according to the brush wear, timely replacement to professional maintenance units, after the new carbon brush, must ensure that its grinding arc is not less than 70%, before putting into operation.
Operation mode.
Can be equipped with a handle and remote control of two kinds; there are four keys and a rocker, four keys are: start, emergency stop, forward and backward, rocker control is the flat car steering, rocker to the left, flat car left, rocker to the right, flat car right, such as want to let the car stop, you can release the forward or backward button or press the stop button, such as want to start again, clockwise rotation of the emergency stop, press the start. The remote control is six keys control, respectively: start, stop, forward, backward, left and right turn, then turn left or right, you must press the corresponding direction button at the same time, then start again, just press the start button directly. Handle and remote control cannot control the flat car at the same time (there is a changeover switch for the handle and remote control on the control box). The flat car is equipped with a handle placement box, which can facilitate the placement of the handle and remote control.
For more details, please refer to, Parfitt Transfer Trolley, welcome your inquiry!
