For the rail mold transfer car, because the nature and function of each car is different, so the requirements of the auxiliary equipment for each transfer car are different, and the requirements of the mold transfer car for the rail are also different, Perfect Transfer Cart gives you an introduction to the requirements of the mold transfer car for the laying of the rail.
For tracked mold transfer car, certainly can not be separated from the track, if you want the transfer cart to run well, track laying is a key, for ordinary track (no need to do insulation treatment), the track laying requirements are not very high, but the parallelism of the two tracks requires a higher degree, so that you can ensure that when the vehicle is running on the track, the four wheels at the same time are in contact with the track, to ensure that the wheel pressure of the wheels and the car body is not Deformation, general laying track, track tread than the horizontal surface of 20mm high, leaving a wheel edge groove.
For the laying of insulated track requirements on the basis of the requirements of the ordinary track, need to do insulation treatment, bolts and pressure plate and all accessories of the track need to be insulated, the parallelism of the laying of the insulated track is a little higher than the ordinary because the wheels need to take power on top of the track, if the wheels do not contact with the track, that is, there is no electricity on top of the car, this situation is not too helpful to the operation of the flat car, so for Insulated track, it is best to find a professional to lay it, so as to come to ensure the good operation of the car later.
The above is the method of laying mold transfer car track summarized by Perfect Transfer Cart, our company can design and customize various specifications and models of transfer car spare parts according to the user’s demand for the transfer car, for the majority of customers to update, replace or modify the electric transfer car, to reduce the user’s investment costs.