The electric transfer carts will have problems in daily use if you don’t pay attention to the daily maintenance. So the daily use of the electric transfer carts should do the following routine maintenance.
1. electric transfer cart tour to see the contents.
Travelling mechanism: motor, coupling, reducer (reduction gear) is not loose and works normally.
The speed reducer (reduction gear) oil is sufficient, the oil quality meets the request, and there is no dust and debris.
The brake is alive and well, the brake wheels touch accurately without severe wear. The wheels touch accurately and roll outstandingly.
Body structure: the body is not deformed, the platform is flat without smash pits, and the whole car is neat.
Electrical module: good contact between the sliding wire and the cable, sensitive movement, complete and unbroken wireframe (or sufficient battery charge). Electrical switches are live and working well. The electric bell sounds bright. Each part of the electrical insulation is good. Other parts: Maintenance information is complete and clean. Equipment parts are in good condition.
2. For the battery-powered electric transfer cart, the battery should be drawn out in time when the power is insufficient to charge according to the request, and replaced by a spare battery for operation. Battery replacement and charging operations should be a person to serve. It is necessary to unload the load and block the power supply before the end of the shift and clean up according to the guidelines.
3. Prohibit over-standard and over-load use of equipment. When loading and transporting heavy objects, it is necessary to put them down smoothly and gently to ensure that the weight is evenly distributed and prohibited to focus on.
4. often check the working condition of each ministry, such as the motor, bearing temperature increase or abnormal sound, should immediately park the car to check. Do not drive the electric flat car to the top, hit, drag, pull the vehicle on the railway track. The direction of travel and retreat is clearly symbolized and consistent with the switch reverse and smooth. The operator is forbidden to detach or entrust someone to take charge of the open equipment.
5. Before starting the equipment it is necessary to announce the signal first, check the direction of movement no one, no obstacles before starting, starting and stopping smoothly to prohibit bumping the end of the block iron. Start the switch can not walk when you should immediately check to avoid burning the motor or causing other incidents. When changing the direction of movement, it is necessary to wait for the movement to stop completely before starting in reverse.
This order of our electric transfer car mainly realizes the water condensation pouring, the customer requires: the flat car platform needs to lift automatically, the lifting height is 200mm, and requires accurate positioning, the mould steel carried by the flat car is used for water condensation pouring, stop at every station, put down the pouring, the transfer cart adopts wireless remote control to realize remote operation, after continuous communication between the two sides, finally the technical agreement is finalized. After continuous communication between the two sides, the technical agreement was finally finalized and the transfer cart has been put into use. The company is committed to revolutionizing the existing building construction method by industrialized construction, providing customers with integrated green building solutions, practising resource conservation and low carbon emission reduction, and promoting the comprehensive innovation and sustainable development of the construction industry.
