What are the methods to reduce the emissions of trackless electric transfer carts? The turning of the trackless electric transfer cart is made by the motor, differential speed change and the turning principle of the car, so that there is a gap in the speed of the wheels to achieve flexible turning, which is free from the restrictions of the track and can stop and move forward at any corner, bringing great convenience to factories and enterprises.
An electric transfer vehicle is a transportation tool for pulling goods or people with the electric battery as the power and motor as the drive; electricity as a clean, high conversion rate of important energy.
1、Install a hose on the bleeder valve of the working cylinder and connect it to a container with brake fluid;
2、Drain the air needs two people to work together, one person slowly steps on the clutch pedal several times, feel the resistance when the pedal does not move, the other person slowly loosen the bleeder valve until the brake fluid begins to flow, and then tighten the bleeder valve.
3, several times in a row until there are no air bubbles in the outflow of brake fluid;
4, after the air is removed clean, you need to check again, all aspects are good in use.
