Perfect Transfer Cart Company can produce nine series of low voltage rail type BDG, BJT cable reel type, BHX safety slip wire type, BXC battery type, BTL cable towing type, BP non-powered type, BQY train traction type, BWP trackless transport type, special vehicles, etc. in the range of 1-1300 tons. Including more than eighty kinds of handling equipment products and crane accessories, holding shaft type reducer, explosion-proof motor, DC motor and many other handling equipment accessories.
The first time you use the electric flat car, you need to install and debug, before starting the electric flat car, you must check whether all parts are in good condition, check the performance of all operating components and safety devices, check whether the battery is fully charged, open the electric lock, move the control rudder to its movement position, slowly turn the gas pedal and move to the corresponding work area, turn the gas pedal forward to move the electric transfer car forward, backward Turn the gas pedal to move backward, and stop when the gas pedal returns to the middle position. Starting, stopping or changing movement should be slow, because sudden movement may cause danger (due to inertia, especially when walking at high speed).
Move only with the current generated by the battery, never use rectified alternating current to avoid damage to electronic components, electric flat car walking load should be in a low position.
1、Regularly clean the gearbox of the electric flat car and replace the gear oil;
2、Clean up the rotating bearings, bearings and add lubricating oil;
3、Check the automatic gearbox system, change the automatic gearbox and change the filter;
The handling equipment produced by our Perfect Transfer Cart Company not only has orders from customers all over the country, but also has been exported to many countries and regions abroad. We will design auxiliary devices or basic drawings for users free of charge according to their specific conditions, and provide technical services or drawing information.
