Shandong Meide Group Linyi Co., Ltd. is a foundry metallurgical company. The transfer carriage is mainly used for the transportation of molten steel. The transfer carriage bears 5 tons, the temperature of the outer surface of the molten steel ladle is 120 tons, and the transfer carriage table is equipped with refractory equipment. . The transfer carriage adopts wireless remote control and wired handle, and the transfer carriage positioning method adopts RFID positioning. There are a total of 6 stopping points, and the positioning accuracy is ±5mm. The communication adopts wireless communication to realize remote control and meet the requirements of automation.
The rail-guided ladle car is a transfer carriage used to transport a specific high-temperature ladle. Due to the high temperature and safety, the requirements of the rail-guided ladle car body material, the transmission system, and the electrical control are quite different from those of the ordinary rail car. In order to prevent the splashing of molten steel or steel slag, the motor starts and stops at a slow speed to reduce inertia. In order to prevent the high-temperature radiation of the ladle, the inside of the rail-guided ladle car body is provided with heat-insulating material. In order to prevent the steel temperature from affecting the damage to the motor, Adopt a double motor, one is damaged and the other can continue to work normally. The heavy-duty rail-guided ladle trolley, also known as the steel water truck. It is also an electric transfer carriage specially developed by a steel mill to transport a high-temperature ladle. Due to the high temperature of molten steel and steel slag, the use of ordinary transfer electric vehicles will cause a series of hazards. In order to avoid the accident of steel and steel slag splashing, causing burns to employees. Our company can customize the product to satisfy customer’s needs on the basis of guaranteeing the customer’s needs.
